NOISE LEVEL INVESTIGATION (L-MIN AND L-MAX) IN PRINTING LABORATORY AT POLITEKNIK NEGERI MEDIA KREATIF, JAKARTA

Authors

  • Antinah Latif Politeknik Negeri Media Kreatif, Jakarta, Indonesia

DOI:

https://doi.org/10.46961/jip.v7i1.67

Keywords:

Noise leve, printing technology, occupationah health safety

Abstract

Printing is one of the activities that have job risks for its workers. One of the risks of works in printing is the presence of physical environment factors. This study aims to determine the noise level with different types of machines in the printing lab at Politeknik Negeri Media Kreatif, Jakarta. The study design used in this research is descriptively obtained through direct measurements using Sound Level Meters in digital printing work areas, Computer to Print machines (pre-press), 4 color sakura brand printing machines (press), and production machines in the post-press machine that is a folding, cutting machine, wire sewing machine, binding machine, and press machine. Obtained an average of different noise levels each section under 85 dBA tolerated by law.

References

Adriyani, R. (2017). Hubungan Pajanan Kebisingan dengan Tekanan Darah dan Denyut Nadi pada Pekerja Industri Kemasan Semen. Jurnal Kesehatan Lingkungan Indonesia, 16(1), 29. https://doi.org/10.14710/jkli.16.1.29-36

Ekawandani, N. (2016). Analisis Risiko Paparan Isopropanol Pada Pekerja Offset Printing. Tedc, 10(3), 191–196.

Livesley EJ, Rushton L, English JS, W. H. (2002). The prevalence of occupational dermatitis in the UK printing industry. Occup Environ Med, 59, 487–493.

Mihailovic, A., Grujic, S. D., Kiurski, J., Krstic, J., Oros, I., & Kovacevic, I. (2011). Occupational noise in printing companies. Environmental Monitoring and Assessment, 181(1–4), 111–122. https://doi.org/10.1007/s10661-010-1817-5

Prica, M., Kecić, V., Adamović, S., Radonić, J., & Sekulić, M. T. (2016). Occupational Exposure to Hazardous Substances in Printing Industry. Proceedings of 8th International Engineirng Symposium at Banki, 1–8.

Sasmita, A., & Elystia, S. (2016). EVALUASI TINGKAT KEBISINGAN SEBAGAI UPAYA PENGELOLAAN KESEHATAN DAN KESELAMATAN KERJA ( K3 ) DI UNIT PLTD / G TELUK LEMBU PT PLN PEKANBARU. 15(September), 34–42.

Setyaningrum, I., & Widjasena, B. (2014). Analisa Pengendalian Kebisingan Pada Penggerindaan Di Area Fabrikasi Perusahaan Pertambangan. 2(April), 267–275.

Shama, M. E. (2009). PERCEPTIONS AND PRACTICES REGARDING MEASURES AMONG PRINTING WORKERS Abstract : 33(2), 155–174.

Starovoytova, D. (2018). Hazards and Risks at Rotary Screen Printing ( Part 6 / 6 ): Control of Chemical Hazards via Cleaner Production Approaches Hazards and Risks at Rotary Screen Printing ( Part 6 / 6 ): Control of Chemical Hazards via Cleaner Production Approaches. April.

Tsai, C. J., Mao, I. F., Ting, J. Y., Young, C. H., Lin, J. S., & Li, W. L. (2016). Quality of Chemical Safety Information in Printing Industry. Annals of Occupational Hygiene, 60(3), 361–370. https://doi.org/10.1093/annhyg/mev079

Downloads

Published

2020-09-04

How to Cite

Latif, A. (2020). NOISE LEVEL INVESTIGATION (L-MIN AND L-MAX) IN PRINTING LABORATORY AT POLITEKNIK NEGERI MEDIA KREATIF, JAKARTA. Jurnal Ilmiah Publipreneur, 7(1), 7–13. https://doi.org/10.46961/jip.v7i1.67

Citation Check

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.